The ­American Boat and Yacht Council says that we can solder, but we must also use a mechanical connection. The thinking is that a ­soldered connection makes the wire brittle and, due to the natural ...

The need to splice a few wires is a very common requirement in electronics and electrical situations ranging from in-progress prototype at the bench to the final assembled product. There are various ...

- If you need to connect two or more wires togetherto extend them or combine them or whatever,there are several different ways to do it.Some are good, some are bad,and teaching you about the different ...

Wire splicing and soldering is a basic skill that any DIYer can master—but it all starts with a solid connection between the two wires. That’s where the Lineman splice comes in. Connecting two wires ...

New York Times subscribers* enjoy full access to TimesMachine—view over 150 years of New York Times journalism, as it originally appeared. *Does not include Games-only or Cooking-only subscribers.

Wires can wear out or get damaged from rodents or corrosion, so it’s common to need to splice them from time to time. You might also need to splice wires if you ...

It's standard practice for electricians to leave at least six inches of wire in wall boxes. That way, you've got enough slack to install a new outlet or switch. But if you're short on wire in a wall ...

Don’t let short electrical wires cramp your DIY project. Splice in extra wire in a few seconds using easy push-in connectors. Electricians should leave at least six inches of wire in wall boxes, which ...

A. The NEC requirement for splicing cables and conductors installed in cable trays is stated in Sec. 392.56. Splices are permitted in a cable tray if the splice is ...

There are plenty of electronic components out there, but the one we tend to forget is the most basic: wire. Sure, PC boards have largely replaced wire with copper traces, but most projects still need ...

A while back, [Marius] was faced with a problem. A friend of his lives in the middle of a rainforest, and a microphone was attacked by a dirty, greasy rat. The cable was gnawed in half, and with it ...