Cyclone Larry - Search Videos

That's a Weird Carabiner

That's a Weird Carabiner

768.7K views9 months ago

We have always thought the Kong Frog was really clever. Press it up against a hanger or ring, and it snaps closed. To open, press the tabs on the side. We were pretty surprised when the carabiner we used to test it broke first, but we shouldn’t have been because it had already endured high forces in other tests. Frog MBS is 23 kN and the carabiner broke at 23 kN. We finally got the frog to break at over 24 kN. Clip into some great carabiners at https://hownot2.com/collections/carabiners | How NO

We have always thought the Kong Frog was really clever. Press it up against a hanger or ring, and it snaps closed. To open, press the tabs on the side. We were pretty surprised when the carabiner we used to test it broke first, but we shouldn’t have been because it had already endured high forces in other tests. Frog MBS is 23 kN and the carabiner broke at 23 kN. We finally got the frog to break at over 24 kN. Clip into some great carabiners at https://hownot2.com/collections/carabiners | How NO

118.7K views9 months ago

FacebookHow NOT 2

I clipped the WRONG strands in the Fusion Knot full episode I released last week. Don’t clip the lower strands or carabiner could get stuck in the knot, clip the higher shelf. This episode tests if it side loads it weird. What’s weird... is that it turned out to be super good enough. Full episode this relates to https://youtu.be/AaIzzBMU-pk Get a free knot with every rope you order at https://hownot2.com/ *some assembly required | How NOT 2

I clipped the WRONG strands in the Fusion Knot full episode I released last week. Don’t clip the lower strands or carabiner could get stuck in the knot, clip the higher shelf. This episode tests if it side loads it weird. What’s weird... is that it turned out to be super good enough. Full episode this relates to https://youtu.be/AaIzzBMU-pk Get a free knot with every rope you order at https://hownot2.com/ *some assembly required | How NOT 2

38.1K viewsMay 8, 2025

FacebookHow NOT 2

Were we concerned about the wrong thing? Instead of breaking at the back of the V thread, the 5mm Dyneema cord broke at the carabiner at 20.89kN. Very close to full strength of a loop. Your V threads may vary. Get your dyneema cord at https://hownot2.com/products/dyneema-cordelette | How NOT 2

Were we concerned about the wrong thing? Instead of breaking at the back of the V thread, the 5mm Dyneema cord broke at the carabiner at 20.89kN. Very close to full strength of a loop. Your V threads may vary. Get your dyneema cord at https://hownot2.com/products/dyneema-cordelette | How NOT 2

14.8K viewsAug 26, 2025

FacebookHow NOT 2

Aid hooks connect to little edges and thin cracks, but you can’t connect a carabiner to them. We include a cord with most aid hooks we sell, but how strong is that cord when attached to the hook? Made for body weight placements, most aid hooks start to bend around 2-3 kN. We didn’t want to ruin our hooks, so we found a climbing hanger with a hole similar to the aid hooks we sell. The cord broke at 6 kN in both tests we conducted. https://hownot2.com/collections/hooks | How NOT 2

Aid hooks connect to little edges and thin cracks, but you can’t connect a carabiner to them. We include a cord with most aid hooks we sell, but how strong is that cord when attached to the hook? Made for body weight placements, most aid hooks start to bend around 2-3 kN. We didn’t want to ruin our hooks, so we found a climbing hanger with a hole similar to the aid hooks we sell. The cord broke at 6 kN in both tests we conducted. https://hownot2.com/collections/hooks | How NOT 2

77.9K views10 months ago

FacebookHow NOT 2

This permanent anchor had rust on it. Usually, ropes break at the knot or at the carabiners when in a loop like we tested this. However, this sample broke at the rust spot. 6 kN is technically sorta good enough to rappel on but you don’t know when it’s dangerous, so we advocate for permanent stainless anchors instead. Get ropes without rust at https://hownot2.com/ | How NOT 2

This permanent anchor had rust on it. Usually, ropes break at the knot or at the carabiners when in a loop like we tested this. However, this sample broke at the rust spot. 6 kN is technically sorta good enough to rappel on but you don’t know when it’s dangerous, so we advocate for permanent stainless anchors instead. Get ropes without rust at https://hownot2.com/ | How NOT 2

22.8K viewsOct 14, 2024

FacebookHow NOT 2

“If 8mm chain is already twice as strong as the carabiner you are clipping to it, why would you go bigger? Here are three good reasons: ✨ It won’t wear out as fast from lowering or rappeling. This is great for high traffic areas! ✨ There is more room to clip carabiners ✨ The warm fuzzy feeling you get when seeing a gleaming chain after a runout pitch Our two samples broke at 56.9 kN and 51.6 kN. Stronger than the hanger, carabiners, and rope you are using to attach it to the wall and yourself. L

“If 8mm chain is already twice as strong as the carabiner you are clipping to it, why would you go bigger? Here are three good reasons: ✨ It won’t wear out as fast from lowering or rappeling. This is great for high traffic areas! ✨ There is more room to clip carabiners ✨ The warm fuzzy feeling you get when seeing a gleaming chain after a runout pitch Our two samples broke at 56.9 kN and 51.6 kN. Stronger than the hanger, carabiners, and rope you are using to attach it to the wall and yourself. L

17.9K viewsJul 18, 2024

FacebookHow NOT 2

How strong are 3D printed carabiners? We tested PLA, ASA and TPU. PLA was the most reliable at about 100lbs. What would you use a 3D printed carabiner for? See our full episode at https://youtu.be/_6EhzJGCA_s or link in bio Get metal carabiners at https://hownot2.com/ | How NOT 2

14K viewsJun 18, 2025

FacebookHow NOT 2

Do carabiners break weaker when stacked on a carabiner. Yes, but only if triple stacked. Throw back thursday to one of our most popular episodes. Get carabiners at hownot2.com #climbinggear #carabiner #breaktest #droptest | How NOT 2

730.9K viewsSep 19, 2024

FacebookHow NOT 2

If your carabiners look like these ones do, get new ones! From 8/30/24 til 9/2/24, get 25% off ALL CAMP PRODUCTS at hownot2.com These carabiners were left near the ocean for a few years. All of that salty ocean air caused their gates to fuse shut and crack right down the middle. How strong is a carabiner in this sort of condition? As you might expect, they were about as strong as the carabiner is rated to in the open gate configuration. In our first test, both carabiners broke at the same time!

186.8K viewsAug 30, 2024

FacebookHow NOT 2

Lappas’ Anchor 316L Steel Carabiner is rated for 48kN but the way we pulled it resulted in 40.70kN... super strong enough. The difference is probably our connectors and speed of pull. It’s one option of open systems at anchors so climbers can clip in. With rings or closed systems, they have to untie and retie, which is inconvenient and has also led to accidents. Get your open systems at https://hownot2.com/collections/open-systems | How NOT 2

25.1K viewsSep 24, 2025

FacebookHow NOT 2

We recently got new tool leashes that @climbingtaiwan likes to use. We also got small, unrated accessory carabiners for use with the leashes that make a bold claim. 10 kN?! That can’t be right! Go figure, they broke lower than that. Yet another great reason not to use unrated gear for life supporting purposes. They are still plenty strong enough to catch a hammer or a drill. Check out our bargain hardware at https://hownot2.com/collections/bargain-hardware | How NOT 2

11.9K viewsApr 28, 2024

FacebookHow NOT 2

Thanks Ken K for sending in this carabiner and sharing it’s story with us. “In 1968 I was leading a pitch on the Benediktenwand in Bravaria, and while setting up the protection at the top of the pitch I had one of those “this is not going to end well” moments. The flake I was standing on gave way, but I did manage to get “rock” out before following up with “iieeeeeee’’ while falling about 5 meters. The belayer did a great job catching me, but it was still a fairly hard on the crotch and back. Af

632K viewsOct 11, 2024

FacebookHow NOT 2

Does a gouge make a carabiner weaker??? Get gouge free carabiners at HowNOT2.store or link 👆 | How NOT 2

331.1K viewsFeb 15, 2024

FacebookHow NOT 2

Made by over 50 years ago, 3 of these carabiners got used and 3 sat in a closet. They were made by Seattle Mountaineering Cooperation. The carabiners that sat in a closet were labeled SMC, the carabiners that got used were white labeled for for Recreation Equipment Inc. Fun fact, SMC’s first product was an oval carabiner for REI. The carabiners we tested are the standard D model. Big thanks to Sam Johnson for doing research on these carabiners. Check out all the information he has compiled about

115.7K viewsSep 26, 2025

FacebookHow NOT 2

Ever seen a carabiner that was hollow? We had to put these on the Slacksnap to see the inside. Made by Salewa in late 70s West Germany these carabiners are rated in Kiloponds. 2000 KP = 2000 KGF = 19.61 kN. Slacksnap broke them at 19.49 kN and and 20.68 kN. At least 20 kN is included with every climbing carabiner you buy at https://hownot2.com/collections/carabiners | How NOT 2

46.3K viewsAug 20, 2025

FacebookHow NOT 2

@drr.rescue built a bfk with powercord that broke at 29.99kN. Then, he put a carabiner in the knot so it would be easier to untie and it broke at 29.84. It has no effect on the strength but it does make it easier to untie. His technical rescue book is the first book we sell at www.hownot2.com #climbing #climbinggear #breaktest #rescuegear #rescue #anchor #knots #knot | How NOT 2

26.9K viewsMay 13, 2024

FacebookHow NOT 2

Petzl warns about pulling on the gate side of a HMS carabiner. If you use it as a master point on your anchor and fill it up, how much force can you put on the gate side. We got 15.63kN testing a Petzl Williams carabiner which is rated for 27kN if used properly. It’s weaker, but super strong enough for most things. Just be careful when clustering up your anchor. Get climbing gear at https://hownot2.com/ | How NOT 2

202.9K viewsJun 12, 2025

FacebookHow NOT 2

Friend or foe? This rubber keeper on your quickdraws holds the bottom carabiner steady so you can clip easier. What if it breaks and only kinda does its job? Watch out for crossloads and inspect your gear! Get non-broken quickdraws at https://www.hownot2.com/ #breaktest #climbing | How NOT 2

89.9K viewsDec 19, 2024

FacebookHow NOT 2

We got a message from @ethan.iddings asking if there were any risks doubling an alpine draw on long slings with small carabiners. The HowNot2 crew thought it was an interesting question and put it to the test. The 22kN rated carabiner broke slightly low at 18.92 kN, and we couldn’t break the Blue Ice Alpine Runner on the UTM. https://hownot2.com/products/alpine-runner | How NOT 2

30.9K views11 months ago

FacebookHow NOT 2

How big is the hole in a Petzl Sm’d carabiner? I can’t get a 3mm cord in it. 2.75 fit and breaks at 1.07kN and 2mm broke at 0.65kN. You can tie off anything you are worried about dropping but I think this device tether is better for when you have snow gloves on. I struggled to get even a 2mm cord in my micro traxion hole so you might need something even smaller if that is what you are tying off. Please DO NOT drill holes in your carabiners. Sm’D is forged that way. If you drill a hole, it could

154.1K viewsMar 27, 2025

FacebookHow NOT 2

We asked you how strong a Blue Ice Alpine Runner was in alpine quickdraw mode. After breaking the carabiners and maxing out our small hydraulic piston, the sling achieved 71.81kN. Gear up for your alpine adventures at https://hownot2.com/collections/climbing-slings | How NOT 2

24.2K viewsSep 19, 2025

FacebookHow NOT 2

A micro traxion is rated down to 6mm. Does it work on 3mm??? Not if it is a single strand but if you double wrap it, it breaks at full knot strength??? That’s crazy cool. How would you use 3mm now that you know double wrap works in a micro traxion? We have 3mm-8mm in 6 different kinds of tag lines... all by the foot. Plus teeth. Plus carabiners. All at https://hownot2.com/ | How NOT 2

17.6K views11 months ago

FacebookHow NOT 2

Royal Robins is famous for his pioneering climbs in Yosemite and his clothing company. We just found out he imported climbing carabiners in the late 70s from Salewa in West Germany. Hollow carabiners are a really interesting dead end in climbing gear as innovations in forging allowed much lighter carabiners. 16 kN is weak by modern standards, but exceeded the rating printed on the carabiner. Lighter and stronger carabiners available at https://hownot2.com/collections/carabiners | How NOT 2

119K viewsJul 17, 2025

FacebookHow NOT 2

Juj Junction Carabiner Controversy Explained

4.1M views7 months ago

TikTokjuj.junction

Understanding the Meaning of Carabiner Art

1.5M viewsDec 20, 2024

TikTokkoshbiakim

Understanding Carabiner Placement: Left or Right?

1.3M viewsMar 11, 2025

TikTokhorsethey

How did this break?

319.9K views6 months ago

#stitch with @crunchyhairopulence Always finding new uses for this guy. #giantsafetypin #lgbtq #wlw #carabiner

2.5M viewsNov 21, 2022

TikTokleiselauren

🔴How to วิธีไปโลกThe end ในDonutSMPแบบEz #minecraft #DountSMP #smp

18.6K views1 week ago

See more

Short videos

The Lorax (2012) End Credits (Cinemax 2019)

10.5K viewsDec 28, 2019

YouTubeEva Guadalupe Romero

Dr Seuss the lorax 2012 credits nickelodeon 6/12/20

5.3K viewsJun 12, 2020

YouTubeShallon Hardman

Dr Seuss the lorax credits Comedy Central

5.1K viewsAug 30, 2020

YouTubeShallon Hardman

Let It Grow Gospel Ending (Original Demo)

363.6K viewsJul 26, 2018

YouTubeRelease - Topic

The Lorax (2012) Modeler Credits

12.6K viewsDec 18, 2024

YouTubeGreg Foret

Dancing to Lorax

695 viewsJun 15, 2013

YouTubeCyllyMommy

Temu Lorax. Credits MetaMind

1.9K views7 months ago

The Lorax (2012) Movie Recap – What You Missed 🌳🧡

12 views4 months ago

YouTubeSnapVerse

Corrina Dancing To The Credits of the Lorax - Piano Accoman to aniamation cel

67 viewsJun 27, 2023

YouTubeVHS DVD Bluray Previews

47.6K viewsJan 9, 2020

YouTubeJohn Powell - Topic

Meet the Lorax! 🌳 | The Lorax | Mega Moments

30.2K views6 months ago

YouTubeMega Moments

Ted, Audrey and the Trees

84.2K viewsJan 9, 2020

YouTubeJohn Powell - Topic

Lorax lore: | credits to ‪@DailyNon-Sense‬

532 viewsSep 14, 2024

YouTubeLemint the bird

The Lorax (2012) ⭐ 6.4 | Animation, Adventure, Comedy

Funeral For A Tree

110.5K viewsJan 9, 2020

YouTubeJohn Powell - Topic

Let It Grow!🌲🌱 | Dr. Seuss The Lorax | Full Song | Movie Moments | Mini Moments

503.9K viewsSep 9, 2024

YouTubeMini Moments

Living With The Lorax! 🏡 | Dr. Seuss The Lorax | Movie Moments | Mini Moments

219.4K viewsApr 21, 2025

YouTubeMini Moments

Let It Grow (Celebrate The World) (From ''Dr Seuss The Lorax'') (Sped Up)

20.5K viewsJan 10, 2023

YouTubeSpeed Geek - Topic

River Ride! | Dr. Seuss' The Lorax | Mega Moments

27.2K views4 months ago

YouTubeMega Moments

Discovering the Truffula Forest! 🌳✨ | Dr. Seuss The Lorax | Movie Moments | Mini Moment

242.7K viewsApr 7, 2025

YouTubeMini Moments